Saka Engineering Systems Private Limited
Saka Engineering Systems Private Limited
Bhosari, Pune, Maharashtra
GST No. 27AAOCS3606F1ZA
TrustSEAL Verified
Call 0804860342689% Response Rate
SEND EMAIL

Fluid Bed Dryers

Fluid Bed Dryers are designed to dry products as they float on a cushion of air or gas. The process air is supplied to the bed through a special perforated distributor plate and flows through the bed of solids at a velocity sufficient to support the weight of particles in a fluidized state. Bubbles form and collapse within the fluidized bed of material, promoting intense particle movement. In this state, the solids behave like a free flowing boiling liquid. Very high heat and mass transfer values are obtained as a result of the intimate contact with the solids and the differential velocities between individual particles and the fluidized gas. Often products are required in agglomerate or granular form to achieve good instant properties and so fluid bed dryers may be combined with spray drying, agglomeration, or granulation systems.

 

This type of dryer can be used in a batch of continuous process. The product flows across a perforated bed in the dryer. Hot air is blown up through the perforated bed causing the product to flow in the air stream. Continuous beds vibrate to move the product through the dryer. Batch type have agitator to keep the product moving through the air stream. Found mostly in pharmaceutical and food (dairy) plants.

 

Unique Features.

 

  • Enhanced heat and mass transfer through intimate contact and mixing with the fluidizing gas.
  • Heat sensitive materials can be dried at temperatures lower than the boiling point due to reduced vapor pressure .
  • Indirect heat transfer surfaces can be added to increase capacity or reduce bed area .
  • Closed cycle Fluid Bed systems, in which inert gases can be recycled, are available to handle toxic products, oxygen sensitive products, or flammable solvent wetted materials.

 

Application

 

  • Polymers and Resins.
  • Inorganic and Organic Chemicals.
  • Chemicals.
  • Agglomerated Products.
  • Fertilizers.
  • Foodstuffs in powder or agglomerated form.

Continuous Fluid Bed Dryer

Continuous Fluid Bed Dryer
  • Continuous Fluid Bed Dryer
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Minimum Order Quantity1 Piece
Usage/ApplicationIndustrial
Automatic GradeAutomatic
DesignCustomized
Body MaterialCast Iron. Steel, Stainless Steel
BrandSaka
DrivenElectric

We provide Continuous Fluid Bed Dryer. This Open cycle systems features pressure shock resistant components or alternatively semi-closed cycle, self-inertizing configuration can be considered depending upon the product. Usually a push-pull system is used to balance the pressure to slightly negative in the free board of the fluid bed. Depending upon the product and available heat source, direct or indirect heating may be applied. Then the exhaust air is cleaned by bag filter, cyclone with or without wet scrubber.

    Request
    Callback
    Yes! I am Interested

    Integrated Fluid Bed Dryer

    Integrated Fluid Bed Dryer
    • Integrated Fluid Bed Dryer
    • Integrated Fluid Bed Dryer
    • Integrated Fluid Bed Dryer
    Ask For Price
    Product Price :Get Latest Price
    Product Brochure

    Product Details:

    Minimum Order Quantity1 Piece
    Automatic GradeAutomatic
    DesignStandard, Customized
    Body MaterialStainless Steel
    Body Material Cast IronSteel, Stainless Steel
    Brand Saka
    DrivenElectric

    We provide Integrated Fluid Bed Dryer for agglomeration. Such systems are generally used for food products like coffee, cocoa-sugar, where instant properties and coarse particles are required.


    In this Integrated Fluid Bed Dryer, a fine powder is conveyed to an agglomeration chamber where the powder is dispersed in air and contacted with a spray of liquid. Moist, porous agglomerates are formed and subsequently dried under lenient fluidization conditions. Once it is cooled, the powder is discharged, classified, and fines recycled for further agglomeration together with fines from the exhaust air dust collector.


       
      Request
      Callback


      Additional Information:

      • Production Capacity: Customised
      Yes! I am Interested
      X

      Explore More Products

      View All Products




      Reach Us
      Anand Thigale (Managing Director)
      Saka Engineering Systems Private Limited
      Plot No J-58, S -Block, MIDC Bhosari, Pune
      Pune - 411045, Maharashtra, India


      Call Us


      Send E-mail